JURNAL REKAYASA SISTEM INDUSTRI
Jurnal Rekayasa Sistem Industri (JRSI) terbit sebanyak dua kali dalam satu tahun (Mei dan November). Terhitung Mulai edisi Mei 2018 publikasi jurnal ini telah dilakukan versi online (ISSN 2621-1262) yang sebelumnya hanya berupa versi cetak (print) (ISSN 2477-2089). Publikasi ini bertujuan untuk menghimpun informasi seputar gagasan, teori dan aplikasi bidang keilmuan Teknik Industri dan Manufaktur.
Articles
28
Articles

Yanto, Fendri

JURNAL REKAYASA SISTEM INDUSTRI Vol 3 No 2 (2018): (Juni 2018)
Publisher : Program Studi Teknik Industri Universitas Putera Batam

Show Abstract | Original Source | Check in Google Scholar | Full PDF (782.761 KB)

Abstract

This research is motivated by frequently  some employees in process wheelblasting and Spray in idle state. After analyzed, it can be identified that the amount of idle time is aused by the material transfer process (Soleplate) which is still done manually which takes 18.5 seconds per unit (bottleneck). the purpose of this study are: To determine whether the conveyor can reduce waiting time in the Steam Promoter line or not. In this study, the anthropometry method used to determine the height of the conveyor and Westinghouse method is used to determine the magnitude of the rating factor and the amount of allowance. The results of this research are: a) The most ideal conveyor height is 90cm b) standard time of manual transfer  (before improvement) is 28.55 seconds, c) standard transfer time using conveyor (after improvement)  is 17.43 seconds, d) The difference of Standard time using manual transport Vs using conveyor is 11,12 second, e) by using conveyor, waiting time can be reduced.

Meldra, Delia

JURNAL REKAYASA SISTEM INDUSTRI Vol 3 No 2 (2018): (Juni 2018)
Publisher : Program Studi Teknik Industri Universitas Putera Batam

Show Abstract | Original Source | Check in Google Scholar | Full PDF (763.428 KB)

Abstract

Measure natural electric voltage at surface used Self-Potential method. Self-Potential one of the methods used to look at subsurface water flow. The negative or positive sign of potential is an important factor for the interpretation of Self-potential anomalies. The finite element technique is applied to model the velocity of water flow, current source, and potential value distribution in the form of  2-D profile. Finite element technique was chosen to solve the problem of boundary conditions and differential equations for Self-Potential modeling. Modeling current sources are obtained by intermediate gradient operation and water flow velocity . From the result of modeling, we get the value of water flow velocity between 10-6 - 10-4 m/s, current source, potential distribution, and potential response on the topography of the slope. Each topography produced different potential response forms, due to the electrokinetic effect. The water flow in the area with slopes topography often causes inundation due to inadequate absorption area, thus causing the grinding of the soil and destroying the road. From the results of this modeling is designed a good water absorption area using visio.

ANALISIS KUANTITATIF ACIDITY LEVEL SEBAGAI INDIKATOR KUALITAS AIR HUJAN DI KABUPATEN CILACAP

Satriawan, Dodi

JURNAL REKAYASA SISTEM INDUSTRI Vol 3 No 2 (2018): (Juni 2018)
Publisher : Program Studi Teknik Industri Universitas Putera Batam

Show Abstract | Original Source | Check in Google Scholar | Full PDF (643.545 KB)

Abstract

Rain is one of the water sources for life on the earth. The presence of rain becomes very important for the life of plants and animals because it will meet their need for water. In addition to the quantity of rainwater, its quality becomes an important role for life on the earth. Contaminated rainwater will result in decreased rainwater quality. This contamination can be physical, chemical and biological. Physical factors that can make rainwater quality worse is the value of acidity level (pH). Low value of acidity levels can lead to acid rain which is dangerous for plants, animals and even humans. This research focuses on rainwater quality seen from its acidity level. It can see how the impact of industrial pollution that developed in Cilacap to the quality of rainwater produced. The method used in this study used an analysis method based on SNI 06-2413-1991 with the rainwater samples from 15 places in Cilacap. The analysis obtained from 15 samples shows that rainwater in Cilacap district has pH 4.5 – 7.6. The rainwater pH <5 occurs in Trenggiling, Manunggal, Karangtalun, and Kutawaru.

Surya, Alfin

JURNAL REKAYASA SISTEM INDUSTRI Vol 3 No 2 (2018): (Juni 2018)
Publisher : Program Studi Teknik Industri Universitas Putera Batam

Show Abstract | Original Source | Check in Google Scholar | Full PDF (681.713 KB)

Abstract

Methanol extract Jengkol Skin (Pithecellobium jiringa) contains Flavonoid compounds that are thought to have potential as anticancer. This study aims to determine the activity of jengkol skin toxicity with maceration for 72 hours against shrimp larvae (Artemia salina) using Brine Shrimp Lethality Test (BSLT) method which has correlation in source of new anticancer compound, resulting in Median Lethal Concentration (LC50 ) for methanol solvent is 126 ppm.

Analisis Konsumsi Energi Karyawan Ketika Melakukan Olahraga Tenis: Studi Kasus Karyawan PT. Aker Solution Batam

Susanti, Elva, Sugianto, Welly, Azharman, Zefri

JURNAL REKAYASA SISTEM INDUSTRI Vol 3 No 2 (2018): (Juni 2018)
Publisher : Program Studi Teknik Industri Universitas Putera Batam

Show Abstract | Original Source | Check in Google Scholar | Full PDF (618.206 KB)

Abstract

This study aims to find the level of energy consumption, CVR% and Boddy mass index through the pulse before and after sports. In calculation of CVR% there are 4 people needed improvement, 1 person must reduce the activity time so as not to injury while doing sports. In determining the heartbeat pulse (pulse) by testing the wilxocon turns out the higher heart rate before exercising, the higher the heart rate after exercise or vice versa. In addition, by doing chi square test between energy consumption with obesity has nothing to do.    

Sirait, Ganda

JURNAL REKAYASA SISTEM INDUSTRI Vol 3 No 2 (2018): (Juni 2018)
Publisher : Program Studi Teknik Industri Universitas Putera Batam

Show Abstract | Original Source | Check in Google Scholar | Full PDF (618.143 KB)

Abstract

Painting activity is a production process that determines the quality of the companys products. This painting process is an application in liquid form, to create a layer for later, a hard layer or cat layer. Product defects from painting activities that are still found by the availability of paint on the product, it is a challenge to provide the company the best  solution. Another problem is  the  number of cats  used by the production department in  the  painting process. Supply chain  issues  in  inventory inventory of painting materials, sometimes stocks and stocks runs out. This study will discuss and analyze the factors that find the number of cats in the painting Truck Body 777 performs Cuase and Effect analysis (fishbone diagram) and uses Analytical Hierarchy Process (AHP) to determine the cats glory factor. Data is taken from production data for one year and four months. Result of research result from every factor of production, cause of product defect in percentage, that is human being equal to 65%, method equal to 62%, machine equal to 48%, material equal to 75%, and environment 50%, and also highest dominant factor difference the amount of paint used in the 777 Truck Body process is a material factor

-, Hazimah, Triwuri, Nurlinda Ayu

JURNAL REKAYASA SISTEM INDUSTRI Vol 3 No 2 (2018): (Juni 2018)
Publisher : Program Studi Teknik Industri Universitas Putera Batam

Show Abstract | Original Source | Check in Google Scholar | Full PDF (446.508 KB)

Abstract

Water is a fundamental and essensial need in life. Batam is one of industrial cities that use a lot of refill drinking water. Industry is a potential source of water pollution especially arsenic (As) and Cyanide (CN, it produces pollutants that are extremely harmful to people and the environment. Industry is a potential source of water pollution, it produces pollutants that are extremely harmful to people and the environment. Many industrial facilities use freshwater to carry away waste from the plant and into rivers, lakes and oceans. Inorganic industrial wastes are more difficult to control and potentially more hazardous Industries discharge a variety of toxic compounds and heavy metals. The most pollutans heavy metals are Lead,Cadmium, Copper, Chromium, Selenium, Mercury, Nickel, Zinc, Arsen and Chromium. Heavy metals are dangerous because they tend to bioaccumulate. While Cyanide is very harmful to the environment and other living things. The perpuse of this research is to know the content arsenic (As) and Cyanide (CN) in the depot of refill water in Batam. Sample analysis conducted at PT.Sucopindo branch Batam Riau Island-Indonesia. The sampel number of six samples from each district Batam is Salsabila Batam Center, Pak De Qua Tiban, Fun Qua batu Ampar, Fresh Qua Bengkong, Salwa Qua Batu Aji, dan Alam Qua Piayu. The result obtained Arsenic (As) and Cyanide (CN) content of sixth refills depots is <0,0001 mg/L dan <0,008 mg/L. The result of this research showed  that all six samples meet the qualification of the Regulation of the Ministry of Health no.492 Year 2010 both arsenic (As) and cyanide (CN).

Sokhibi, Akh

JURNAL REKAYASA SISTEM INDUSTRI Vol 3 No 2 (2018): (Juni 2018)
Publisher : Program Studi Teknik Industri Universitas Putera Batam

Show Abstract | Original Source | Check in Google Scholar | Full PDF (672.415 KB)

Abstract

Practicum in the laboratory of a university is not widely realized that it can have an ergonomic disorder (ergonomic disorder). This ergonomic disorder risk study was conducted on 56 students using Ergonomic Laboratory and System Working System of Muria Kudus University.The method used in this research is descriptive quantitative research with survey and observation instrument to analyze the risk of the occurrence of Musculosceletal Disorder (Ergonimic Disorder). Weighting and scores as well as statistical tests of contingency coefficients are used to determine the relationship level of risk with the incidence of Musculosceletal Disorder (Ergonimic Disorder).The results of this research is indicate that in the population who conducted high activity in the laboratory was 55.4% and in the population who were doing moderate activity in the laboratory of 44.6%. In other variables known are ergonomic disorders of 43% and no ergonomic disturbance disorder of 57%. While for statistical test result contingency coefficient equal to 0,26. The conclusion of this research is that facilities and attitude not ergonomic and less maximal socialization of K3 can cause complaint of ergonomic disorder at user of Mechanical Engineering Laboratory of Muria Kudus University

Mahendaringratry, Ayudya, Wido Herawan, I gede Asta

JURNAL REKAYASA SISTEM INDUSTRI Vol 3 No 1 (2017): (Desember 2017)
Publisher : Program Studi Teknik Industri Universitas Putera Batam

Show Abstract | Original Source | Check in Google Scholar | Full PDF (609.136 KB)

Abstract

Puskesmas (Pusat Kesehatan Masyarakat) are the direct service community of government health agencies to serve and should pay attention to the level of service to patients. The problems mostly is the lack of knowledge and skills of medical personnel and administrative personnel in dealing with patients and inform patient illness. To improve the service to the patient is the concept of DMAIC improvement with five stages. In this research, the worst cause of service is that the employees of Puskesmas X do not have the knowledge to answer the patients question with the percentage of 62.8%. So the improvement is focused on the five causes of disabled services, which occurred in December 2016. Kata kunci: Kualitas Layanan, Lean Service,  Six Sigma

Sokhibi, Akh

JURNAL REKAYASA SISTEM INDUSTRI Vol 3 No 1 (2017): (Desember 2017)
Publisher : Program Studi Teknik Industri Universitas Putera Batam

Show Abstract | Original Source | Check in Google Scholar | Full PDF (457.147 KB)

Abstract

Jenang is one of the special food from the Kudus City of Central Java Province. The process of making jenang through several stages, namely the process of material insertion, the process of mixing the material while cooked with the mix, the process of printing in a baking sheet and packaging process. In the process of this jenang packaging is done by workers who sit on a wooden chair with no foam pads and no back support. Sitting position, judging from the aspect of ergonomics sitting position is less comfortable. Therefore, it is necessary to design seats for ergonomic jenang packaging operators. The method used in designing this chair is by descriptive analysis, with the seat dimension approach to anthropometry of workers body. Required data include anthropometric data of workers packaging body dimensions and data obtained from existing research. Then the data is processed to be applied to the design. This design is a prototype that will be measured and applied to the packaging hood of the worker. The purpose of this research is applying ergonomic chair to jenang packaging worker, so it is expected to improve work position of jenang packaging worker and reduce discomfort that can cause fatigue. The result of the research shows that with the application of ergonomic chair design to the jenang packaging worker, there is improvement of work position on the jenang packaging worker and decrease the level of discomfort that happened to the neck, back, round, buttock and elbow of the jenang packaging worker.