Kuncoro Harto Widodo
Fakultas Teknologi Pertanian Universitas Gadjah Mada

Published : 18 Documents
Articles

Found 18 Documents
Search

Sistem Supply Chain Crude-Palm-Oil Indonesia dengan Mempertimbangkan Aspek Economical Revenue, Social Welfare dan Environment Widodo, Kuncoro Harto; Abdullah, Aang; Dwi Arbita, Kharies Pramudya
Jurnal Teknik Industri Vol 12, No 1 (2010): JUNE 2010
Publisher : Institute of Research and Community Outreach - Petra Christian University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (71.575 KB)

Abstract

Crude-Palm-Oil (CPO) is an agro-industrial commodity which has a strategic value to be developed for Indonesian economy and social welfare. Production and export of Indonesian CPO increase progressively in the view years so that CPO is one of the pre-eminent products of Indonesia. On the other hand, however, they could give two negative impacts. First, a less CPO supply for domestic market as a result of export growing. Second, a worse environment as an effect of the opening new palm plantations. We, therefore, construct and simulate the system model for analyzing the relationships between the components and for describing their behaviour within the supply chain of CPO by using a dynamic model. The result shows that in the next 30 years, the revenue of Indonesian CPO industries tends to increase. The biggest revenue will be achieved in the year 23rd. The maximum addition of plantation employees is in the year 7th as well as in the year 17th. Deforestation would be the highest in the year 7th and 17th in which 2008 as a basic year.
Kriteria Pemilihan Pemasok Menggunakan Analytical Network Process Kurniawati, Dewi; Yuliando, Henry; Widodo, Kuncoro Harto
Jurnal Teknik Industri Vol 15, No 1 (2013): JUNE 2013
Publisher : Institute of Research and Community Outreach - Petra Christian University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (71.575 KB) | DOI: 10.9744/jti.15.1.25-32

Abstract

The selection of supplier is a strategic decision in supply chain which increase competitive advantages. Every manufacture needs to have a standard supplier selection that appropriate with the requirement of the company. The aims of this paper are promoting some criterias of supplier selection and testing whether there are differences interests against priority criteria referred to of strata tenure distinct. Weights and priorities of the criteria tested with a method of analytic network process (ANP) are also intended to bring up a relation of mutual influence among the criteria. ANP can be used to help making decision of selection supplier and to manage supply chain performance. This paper shows the criteria that influence are the past perfomance, price, communication systems, and a supplier of professionalism is the priority for the production of the company. In the other hand, the importance of management is the delivery time, consistent quality, price, and number of delivery. The difference in perspective is influenced by the level of interest and different responsibilities. The difference this assessment formed the basis of decision-making and strategic policies of the supply chain according to the condition of the company.
BASIC SUPPLY CHAIN BAWANG MERAH (ALLIUM ASCALONICUM L) DI KABUPATEN BANTUL DAERAH ISTIMEWA YOGYAKARTA DARI PERSPEKTIF SISTEM DINAMIS Widodo, Kuncoro Harto; Rembulan, Dewi
Industrial and Systems Engineering Assessment Journal (INASEA) Vol 11, No 2 (2010): INASEA Vol. 11 No. 2
Publisher : Industrial and Systems Engineering Assessment Journal (INASEA)

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Shallot (Allium ascalonicum L) is a valuable agro-industrial commodity for community. The demand of the commodity in Indonesia increase progressively in the few years so that shallot is one of the pre-eminent products of Bantul Regency. Delays in shallot supply from local farmers stems from various problem in supply chain which is very dynamic. This study analyzes these problems from supply chain point of view by identifying the behavior of the system and by analyzing the relationships between the components. The study, then, describe their behavior within the supply chain by using a dynamic system. We obtain that there is three basic groups : farmers, warehouse, and user. Each group plays a role in providing quality, quantity and avalaibility, post harvest technique, production cost, and selling price.These three big groups influences the others in terms of quality, quantity and shallot supply, post-harvest process, and cost and sale price.
Sistem Dinamis Industri Furniture Indonesia dari Perspektif Supply Chain Management yang Berkelanjutan Widodo, Kuncoro Harto; Arbita, Kharies Pramudya Dwi; Abdullah, Aang
Agritech Vol 30, No 2 (2010)
Publisher : Faculty of Agricultural Technology, Universitas Gadjah Mada, Yogyakarta, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22146/agritech.9681

Abstract

This research aims to predict and describe the sustainability of Indonesian furniture development by considering 3 as- pects: economical revenue, social, and envieronment, as the main aspects in a sustainable supply chain. This research was started by identifying the basic model of supply chain of furniture industry. We, then, identified the potency and weaknesses from either internal or external, by using SWOT (strength, weakness, opportunity, threat) analysis. We used modeling and simulation to describe the system behaviour. The result showed the characteristics of this industry is un- certainty on consumer demand and that the industry depends on the availability of raw material from forest. There is a lack in supply in the average amount of 3.386.282 m3. The development of furniture industry needs to consider more the aspect of sustainability. Forest destruction is one of the parameters of environmental aspect, in which the decreasing rate of natural production forest and overall forest are 61,982 ha and 51,820 ha per year, respectively. Furthermore, as one of the economical aspects, the economical revenue achieved by this industry tends to constant. On the other hand, this industry can meet the consumer demand, representing the social aspect.ABSTRAKPerlu ada kajian untuk melihat dan memprediksi keberlanjutan pengembangan industri furniture Indonesia dengan melihat kepada 3 aspek, yaitu aspek ekonomi, aspek sosial dan aspek lingkungan, sebagai aspek utama dalam pengem- bangan supply chain management yang berkelanjutan. Penelitian ini diawali dengan identifikasi model dasar supply chain industri furniture. Selanjutnya, digambarkan potensi dan kelemahan yang ada, baik secara internal maupun ek- sternal, dengan menggunakan analisis SWOT (strength, weakness, opportunity, threat). Untuk melihat perilaku sistem dilakukan pemodelan dan simulasi. Hasil penelitian ini menunjukkan bahwa karakteristik industri furniture adalah ketidakpastian permintaan konsumen dan sangat tergantung pada kondisi hutan untuk menjamin ketersediaan pasokan kayu. Setiap tahun terjadi kekurangan pasokan rata-rata sebesar 3.386.282 m3 dibandingkan kebutuhannya. Pengem- bangan industri furniture masih kurang memperhatikan aspek keberlanjutan. Kerusakan hutan menjadi salah satu pa- rameter keberlanjutan aspek lingkungan dimana tingkat penurunan luas hutan produksi alam dan hutan keseluruhan berturut-turut adalah sebesar 61.982 ha dan 51.820 ha. Selain itu, dari aspek ekonomi, pendapatan (revenue) yang bisa dicapai oleh industri furniture cenderung tidak mengalami peningkatan. Di sisi lain, industri furniture Indonesia cukup baik dalam memenuhi kebutuhan konsumen, sebagai indikator aspek sosial.
Product-Relationship-Matrix Concept for Marine and Fishery Supply Chain Model Development Widodo, Kuncoro Harto; Perdana, Yandra Rahadian; Sumardjito, Joewpno
Jurnal Teknologi Pertanian Vol 12, No 2 (2011)
Publisher : Fakultas Teknologi Pertanian Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Indonesia, as an archipelago country has the resources of marine and fisheriesboth in terms of its quantity and diversity. Currently the demand of fisheries productscontinue to increase. This is an opportunity for Indonesia to be able to utilize theeconomic potential as a competitive advantage lies in the mechanism or how to regulatethe flow of marine and fishery products in a supply chain. Therefore, this paper aims topropose a concept of Product-Relationship-Matrix for the development of supply chainmodels of marine and fishery. This model is expected to support the development ofeconomic and the well-being of marine and fishery businesses community, both in small,medium and large scale.Keywords : Supply chain, Product-Relationship-Matrix, marine and fishery products.
LAMA WAKTU YANG DIHABISKAN PASIEN DI UGD RSPAU dr. S. HARDJOLUKITO DAERAH ISTIMEWA YOGYAKARTA Murtiningrum, Sri; Lestari, Trisasi; Widodo, Kuncoro Harto
Jurnal Manajemen Pelayanan Kesehatan Vol 18, No 1 (2015)
Publisher : Jurnal Manajemen Pelayanan Kesehatan

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Latar Belakang: Salah satu keluhan pasien yang paling sering muncul adalah lama waktu yang dihabiskan pasien di unit gawat darurat setelah mereka mendapatkan penanganan pertama. Pasien harus menunggu sebelum mereka bisa pulang, atau dipindahkan ke bangsal perawatan, ke ICU atau menjalani operasi. RSPAU Dr Suhardi Hardjolukito adalah RS tipe B dengan kapasitas 215 tempat tidur. Tujuan: untuk mengukur lama waktu yang dihabiskan pasien di UGD dan menganalisis faktor-faktor yang mempengaruhi lama waktu tunggu tersebut. Metode: Ini adalah penelitian observasional dengan rancangan cross-sectional. Penelitian dilakukan di unit gawat darurat RSPAU Dr Suhardi Hardjolukito, yang memiliki kapasitas 15 tempat tidur, pada bulan November 2014. Observasi dilakukan selama 7 hari pada shift pagi, sore, dan malam. Sejumlah 305 pasien menjadi sampel penelitian dan diamati selama pasien berada di UGD. Hasil: Rata-rata waktu perawatan di UGD RSPAU dr.S.Hardjolukito masih sangat bervariasi, berkisar antara 8 s/d 270 menit (4.5 jam). Tahapan pelayanan yang memiliki waktu tunggu paling lama adalah pelayanan di laboratorium dan radiologi. Sementara karakteristik kunjungan yang paling besar pengaruhnya terhadap lama pelayanan di UGD adalah kunjungan pada hari kerja, jenis kelamin pasien perempuan, diagnosis emergency, dan waktu kunjungan pagi hari.  Kesimpulan dan Rekomendasi: Waktu yang dihabiskan pasien di UGD RSPAU dr.S.Hardjolukito sangat bervariasi. Banyak penyebab waktu tunggu tersebut sebenarnya tidak penting dan bisa dicegah. Rumah sakit harus mengurangi kepadatan UGD pada waktu-waktu sibuk dengan meningkatkan efisiensi RS, memperbaiki alur pasien, dan menggunakan metode maajemen operasional dan teknologi informasi 
OPTIMASI KINERJA RANTAI PASOK INDUSTRI TEKSTIL DAN PRODUK TEKSTIL INDONESIA BERDASARKAN SIMULASI SISTEM DINAMIS Performance Optimation for Supply Chain of Indonesia Textile and Textile-Product Industries based on Dynamic System Simulation Widodo, Kuncoro Harto; Ferdiansyah, Erdi
Jurnal Agritech Vol 30, No 01 (2010)
Publisher : Jurnal Agritech

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The purpose of this research was to optimi�e supply chain performance of Indonesia textile and textile product indus� tries. Optimation was conducted by considering export and import quantity. Optimi�ing of supply chain performance was obtained by using dynamic system simulation  approach. The research was started by identifying  the basic supply chain system of Indonesia textile and textile�product industries. SWOT analysis was implemented to identify condition and needs of each suppply chain element based on strengths, weaknesses, opportunities and threats. The next stage was by creating  supply chain system model using dynamic system software including with its validation.  The last stage was by simulating the model with scenarios to optimi�e the performance. The result showed that there are 3 scenarios to op� timi�e Indonesia textile and textile�product industries performance, those are short, middle and long term scenarios.ABSTRAKPenelitian ini bertujuan untuk mengoptimalkan kinerja rantai pasok dari industri tekstil dan produk tekstil �ITPT� Indonesia. Optimasi dilakukan dengan mempertimbangkan kuantitas ekspor dan impor. Pengoptimalan kinerja rantai pasok diperoleh berdasarkan pendekatan simulasi sistem dinamis. Penelitian diawali dengan mengidentifikasi sistem dasar rantai pasok ITPT Indonesia menggunakan analisis SWOT untuk menggambarkan kondisi dan kebutuhan dari masing�masing elemen rantai pasoknya berdasar kekuatan, kelemahan, peluang dan ancaman yang dimiliki. Tahap selanjutnya adalah dengan memodelkan sistem rantai pasok tersebut menggunakan perangkat lunak sistem dinamis beserta validasinya. Tahap terakhir adalah mensimulasikan model tersebut berdasar skenario�skenario yang menga� rah pada optimasi kinerjanya. Hasil dari penelitian ini adalah diperolehnya 3 skenario optimasi, yaitu skenario jangka pendek, menengah dan jangka panjang.
Perbaikan Kinerja Supply Chain Perusahaan Keripik Singkong Berdasarkan Analisis Product Availability Kusuma, Parama Tirta Wulandari Wening; Widodo, Kuncoro Harto; Purwadi, Didik
Agritech Vol 30, No 2 (2010)
Publisher : Faculty of Agricultural Technology, Universitas Gadjah Mada, Yogyakarta, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22146/agritech.9678

Abstract

Level of the product availability becomes a problem at the company, because of the fluctuation and the uncertainty of demand from the consumer and happened when the company determined the cycle service level which is the indica- tor of supply chain performance in fulfilling the availability of the product and avoiding either stock out or over stock in replenishment cycle. This research was conducted at UD As-Salam. The aim was to improve supply chain perfor- mance through determining the optimal cycle service level of product availability. Therefore, it was needed to set up the optimal level of product availability to optimize the profit. There were some steps that were taken in this research: determining the optimal cycle service level, optimal order size, expected profit, and sensitivity analysis between optimal cycle service level and expected profit. The result showed that the cost of under stocking and over stocking were 4,144 rupiahs and 6,573 rupiahs, respectively. The optimal cycle service level was 63 % with optimal order size was 2,842 kgs/month. This value improves the company’s profit in the amount of 11,043,570 rupiahs. The improvement of supply chain performance based on product availability analysis could increase profit up to 127,891 rupiahs.ABSTRAKLevel ketersediaan produk menjadi permasalahan pada objek penelitian ini karena adanya fluktuasi dan ketidak- pastian permintaan dari konsumen yang timbul ketika pelaku usaha telah menentukan cycle service level. Hal ini menjadi indikator kinerja supply chain dalam memenuhi ketersediaan produk dan menghindari kekurangan stok atau- pun kelebihan stok di siklus replenishment. Penelitian dilakukan di UD As-Salam, dan bertujuan untuk memperbaiki kinerja supply chain dari sisi product availability. Perlu ditetapkan optimal level of product availability agar mampu mengoptimalkan profit. Metode yang digunakan adalah dengan penentuan optimal cycle service level, optimal order size, expected profit, dan analisis sensitivitas terhadap optimal cycle service level dengan expected profit. Hasil peneli- tian menunjukan bahwa nilai cost of understocking adalah Rp 4.144,00 dan cost of overstocking adalah Rp 6.573,00. Nilai optimal cycle service level dapat dicapai pada level 63% dengan optimal order size 2.842 kg per bulan. Nilai ini mampu memberikan profit sebesar Rp 11.043.570,00. Peningkatan kinerja berdasarkan analisa product availability akan  memberikan peningkatan profit sebesar Rp 127.891,00 pada perusahaan.
Analisis Produktivitas Perusahaan Tempe "Murni" Yogyakarta di Masa Krisis Ekonomi Widodo, Kuncoro Harto; Jumeri, Jumeri
Agritech Vol 19, No 3 (1999)
Publisher : Faculty of Agricultural Technology, Universitas Gadjah Mada, Yogyakarta, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22146/agritech.13725

Abstract

-
Optimasi Model Persediaan Produk Makanan Ternak Pada Tingkat Distributor di Propinsi Daerah Istimewa Yogyakarta Widodo, Kuncoro Harto
Agritech Vol 18, No 4 (1998)
Publisher : Faculty of Agricultural Technology, Universitas Gadjah Mada, Yogyakarta, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22146/agritech.19353

Abstract

Inventory management is a general problem in manufactures, service companies, government institutions included feedmill distributor. Inventory policy in those institutions are determined by several objectives which the main are minimizing the total cost or investment inventory, the consumer satisfaction and maximizing the output efficiency. Structural problems related with feedmill inventory consists of total cost inventory, order quantity and reorder point. Economic Order Quantity (EOQ) model is one of tools in order to solve problems above, in detail this tool is used to optimize feedmill inventory in the distributor level, especially in the feedmill manufacturing product, the milled corn and the rice sifting components. The result of the research shows that by using the EOQ model, there is a total cost inventory reduction, such as the feedmill manufacturing product decrease from 8,046,778 rupiahs to 1,890,865 rupiahs, the milled corn component from 1,785,721 rupiahs to 103,310 rupiahs and total cost inventory for the rice siftings component decrease from 598,812 rupiahs to 96,686 rupiahs. Based on the final result above, it is summarized that the EOQ model instrument minimized the total cost inventory in feedmill product on the distributor level.